Hardware Supported by Felix
One-Wire Hardware
Felix should be able to support any devices based on the following chips:
|
Chip
|
Description
|
Channels and Features Supported
|
|
DS1820
|
Temperature sensor
|
Temperature
|
|
DS2405
|
Single switch
|
PIO
|
|
DS2406
|
Dual addressable switch
|
Channel A, Channel B, Vcc
|
|
DS2408
|
Eight channel switch
|
Bit 0 – bit 7
|
|
DS2409
|
MicroLAN Coupler
(Hub chip)
|
Felix automatically detects and supports any arbitrary network topology using one-wire hubs based on the DS2409. Hubs can be nested up to four levels deep.
|
|
DS2413
|
Dual addressable switch
|
Channel A, Channel B
|
|
DS2423
|
Quad Counter
|
Count A and B
|
|
DS2438
|
Battery monitor
|
Temperature, Vad, Vdd, Current
|
|
DS2450
|
Quad A/D Converter
|
A,B,C,D
Input mode only.
All channels are configured to input range 5.12volts
Alarm thresholds not supported
|
|
DS2760
|
Battery monitor
|
Temperature, voltage, current
|
|
WS603
|
Weather instrument
|
Temperature, wind speed, wind direction, light level, supply voltage
|
X10 Hardware
X10 support in Felix is currently quite basic. We’d certainly like to add support for more X10 computer interfaces.
|
CM11 and CM12 computer interfaces
|
|
|
Firecracker computer interface
|
|
|
Non-dimming output devices
|
e.g. AM12, AD10 etc
|
|
Dimmable output devices
|
e.g. LM12, LD11 etc
|
|
Input devices
|
e.g. HR10 etc
|
|